you can do this simple check using a webbrowser…
enter http://xxx.xxx.xxx.xxx/aircon/get_control_info url in your webbrowser, replace xxx.xxx.xxx.xxx with the IP-address of your Airco and you should see a response like shown below.
ret=OK,pow=0,mode=4,adv=,stemp=24.0,shum=0,dt1=24.0,dt2=M,dt3=21.5,dt4=24.0,dt5=24.0,dt7=24.0,dh1=0,dh2=0,dh3=0,dh4=0,dh5=0,dh7=0,dhh=50,b_mode=4,b_stemp=24.0,b_shum=0,alert=255,f_rate=A,f_dir=0,b_f_rate=A,b_f_dir=0,dfr1=A,dfr2=B,dfr3=A,dfr4=A,dfr5=A,dfr6=A,dfr7=A,dfrh=5,dfd1=0,dfd2=0,dfd3=0,dfd4=0,dfd5=0,dfd6=3,dfd7=0,dfdh=0
If it is not working try replacing http with https.
If you see this response in your browser Daikin AI most likely will work, however no guarantees nor support for this adapter/heatpump combination/model.