Be carrefull, "rollershutter 3" from Fibaro does not work on Homey for venetian blinds

[DirkG]

It’s a known issue. So my suggestion is: @Thierry_Sabatier please contact Athom!

But there are some workarounds:

Venetian blinds + Fibaro Roller Shutter 2 + Fibaro Athom B.V. - No Rotation control

Smart Home - Roller Shutter 3 & Venetian blinds Hi all, I’m newbie to homey too… (6 days). I have finaly found the way how to trim lamelas. I was able to succesfully repeat it using this guide on all blind in my house. Its quite complicated, but during my detetective work i learn a lot about z-wave device control. Now I understand why so many users failed to solve it. To have it really done in the right way, as it is in Fibaro Home Center, It needs to be fixed by Homey / Fibaro app plugin. …

Z-Wave-Alternativen zu Fibaro Roller Shutter

Habe seit Einrichtung (@fantross hat es weiter oben verlinkt) damals nichts mehr gross verändert da es bisher sehr gut funktioniert. Schaut auch irgendwie fast schon imposant aus: Sonne kommt, alle Jalousien fahren runter und stellen dann zeitgleich(!) und nicht einzeln die Lamellen etwas auf. Es gibt bei den “Tags” aktuell “Jalousien-Status” (Up/Down) , “Dimm-Level” (bei mir 0 = unten, 1 = oben, 0.50 halb-offen/halb-geschlossen) und “Leistung” (wenn Jalousien etwas machen). Bei den Dann-Kar…

(Sorry, only in German)

Because I don’t have Venetian blinds I don’t know if it works.

@Thierry_Sabatier

for the venitian blind (parameter 150,1,2)

This parameter will be set by choosing the type (Roller blinds, Venetian blinds, others… / don’t no if these are the right names in English) after tapping the gear wheel.
You can check it in Developer → Tools → Devices.

Btw, I guess you mean: 151,1,2.
You can do a raw configuration if some parameters are missing in advanced settings of the device.
You can do it in the Advanced Settings → Raw Configuration, via Flow Then… > Z-Wave → Send unprocessed command or in Developer → Wireless → Z-Wave → Send Raw Data.