Sure. U can download it here.
" Supported devices
RM3 mini
The RM3 Mini is a wifi to IR (infrared) device. It can learn IR commands and transmit them.
This app is only for the 5F36 version (red)"
If u did not yet download the HCS app yet then u can also do that on the very same page.
Ok did it! I didnât know about this app.
I have device in my homey but there is no so devices in my broadlink app.
I saw in advance setting rc commands fron 1 to 30 but if i chabge name i have back an error
And u did learn the IR commands in the settings of the app?
Like push the button in the settings, go to advanced settings and rename the first command u learned?
I didnât
I will try it.
Do you have 30 buttons in total to customize?
Hi I cannot learn any command. I push the learn ir command but nothing.
I can do it with broadlink app instead
You shouldnât use the broadlink app, then the homey broadlink app doesnt work
So do i have to remove the rm3 fron the broadlink app?
Does the community app work with FW 5.0.0?
Is 5F36 version a FW version? I guess that if I purchase a RM 3 mini I will need to either upgrade or downgrade?
It works on FW 5.0
Thanks, how about 5F36? Is that a hardware model or is it a FW/SW version?
Or, can I just buy a RM3 and expect it to work with this app?
Hi, just received my RM4 Mini.
Adding the device to homey was very easy, but if I tap the button to learn IR commands nothing happens.
The led on the RM4 Mini is not on, just nothing.
Am I doing something wrong?
Thanks !
Eric
Hello,
I just received mine RM3 mini (broadlink) and try to installed on Homey with Broadlink app.
After many times to trying to add the RM3 mini with the ip adress to Homey got a message âunknown (5F36)â
No idea what goes wrong and after reading on the forum i found this app of Pieterv123
https://store.homey.community/app/com.broadlinkrednode
After i have installed this app you get a Broadlinkred app in Homey.
When i goes now to add app and i choise Broadlinkred you see RM3 mini.
I click on RM3 mini and install the ip adress and i got the RM3 mini on the Homey.
After this installation i installed the broadlink app on the mobile
I install the device and also add the appliances (TV, Setup box, Mediaplayer, etcâŚ)
This is working oke on the mobile to control it with the broadlink app on the mobile.
Now i will try to make this also possible on Homey.
I goes in Homey to the device âRM3 mini redâ settings and i see a list of 30 empty commandoâs.
I try to touch on learn IR commando ⌠push the button for a while but nothing happend?
Also try the touch the remote control of the TV while i pushing the button of learning IR commando but nothing happend?
How or what must i do to get the commandoâs whats on the broadlink app of the mobile to get this on the Homey app âBroadlinkredâ
What steps must i make or do maybe i have missing something ?
Who can helped me ?
You have to remove the device from the broadlink app, see instructions
Thank you Pieter,
Yes i was not read it correctly sorry so After i have installed the app âBroadlinkredâ in Homey.
Then installed the âBroadlinkâ app (Broadlink - universal TV remote) on the mobile (playstore).
the installed of Broadlink goes as follow:
The last row is very important yes to close the app when you see add the device and join the room.
After this i select in Homey the device âRM3 mini redâ and also in the advance settings i re-authenticate device on yes.
When i click now on the button of learn IR commando it works.
Hello,
After a few days, weeks, I donât know exactly, some commands donât work anymore. Two gates control. I need to relearn the command.
Has anyone encountered the same problem?
Thanks a lot Peter, it solved my issue
Hello,
Is there any possibility to press the button in homey for several seconds (min. 3s) to trigger the RF button on the broadlink longer?
With my normal RF sender I can set middle position on my SunFree blinds - need to push middle button more than 3 s.
Buttons are normally scanned by broadlink rm pro+ and added to Homey app.
Any suggestions how to use? It would help me a lot.
Iâve looked at the community App Store and saw 2 versions of the app. Does the non red version of the community app work with the rmpro (rmpro3 I think)? Looking to update homey but I rely on the rmpro for some old fans and this app here doesnât seem to be updated anymore.
Youâll need the official app. rm pro is supported, rm3 pro also for what i understand.
