Homey Community

Groups


#1

Groups

Formally Device Groups

With this app you can group devices with the same capabilities as one device. This means you an control multiple devices from the one place.


Please note that this app now only supports v2, while legacy code should continue to work, new installations are not possible nor supported.

Versions

Status

Branch Version Status Notes
Stable 1.1.0 :white_check_mark: Not compatible with v2
Beta 1.1.0 :white_check_mark: Update Pending Athom Approval
Alpha 2.0.201 :ballot_box_with_check: Working, changing.
Omega 2.0.205 :grey_question: Currently updated daily. 2.1.100 coming soon!
Master n/a :heavy_multiplication_x: Here there be dragons.

Notes

When upgrading from Homey v1 to Homey v2, you will have to re-create your groups.

Using

  1. After installing, to add a new Group, click + (add) upon the devices tab select “Group”.
  2. Now select the group device’s class. (e.g. Light).
  3. You will now see all the capabilities supported by this class. Now chose the ones you need. (e.g. Turned on" and “Dim level”, “Temperature” ).
  4. On this page you will find all devices that have the capabilties you selected, simply select the devices you want to group.
  5. On this final page you change change the icon of the device if you would like, or select next to use the default.
  6. Now you have one device to control all the grouped devices.

Feature List :

:white_check_mark: Groups different (or the same) devices together

You can group as many devices as you would like together, allowing them all to be controlled / or viewed as one device.

eg. Group all the lights in your house and control the all at once, either as a device or flow
eg. Group all your contact sensors and be able to see if any doors or windows have been left open
eg. Group all your temperature sensors and if the average temp of your house goes down, turn on the heater

:white_check_mark: Simplify your flows

Simplify your flows by adding a group to any part of the flow and have the action carried out upon the entire group.

_eg. If any motion sensor detects motion then turn on all the lights in your house _
_eg. If the sum of power used by all devices is greater 700W then turn set all the heaters in your house for 5 min _

:white_check_mark: Enhance your flows

Enhance your flows by having them only trigger when you want, you can even make it so that a group will only turn on if the (sum, average, mean average, min, max) meets a criteria.

:white_check_mark: Supports most device classes

You can now add groups for any category from kettles to sensors and everything between 18 categories are supported, the rest to be added once available in Homey 2.

:white_check_mark: Now supports all device capabilities

All standard device capabilities are now supported, this means that you can now group anything from temperature sensors, lux sensors, motion alarms, vacuum cleaner states, power measurements. All 72 capabilities have been added.

:white_check_mark: Give feedback on device status

Your group cards will now give feedback if something changes with in the group, either in or outside of the Homey App.

eg. In a grouped set of Hue lights, if you change the colour of the lights to red with in the Hue app, your device group card will now show as red.

This is working, however some people (including me) are experiencing an issue where the gen 2 app is not updating devices

:negative_squared_cross_mark: Choose how information is display method

You can now choose how each groups capability will be reported back to you.

eg. Set the grouped temperature sensors to show the average temperature, but the highest humidity value.
eg. Show the total amount of power used for all grouped lights, but median average dim levels
eg. Only set the light card on if all lights are on, but turn on the grouped motion sensors if any detect motion.

Currently disabled while awaiting Athom to fix this issue.

:negative_squared_cross_mark: See more information, quicker.

You can now click on a group’s settings to see which devices, which capabilities have been included and which method is being used to display the results. As always you can still change the values from the app settings, along with which method is being used.

Currently disabled while awaiting Athom to an issue with the Gen2 App - [https://support.athom.com/hc/en-us/requests/new](http://click here) and ask for Athom to fix this issue.

:negative_squared_cross_mark: Choose your language.

Added (technical) support for NL, please note - I don’t speak Dutch, and adding translations is a work in progress.

Other

Lots of other small fixes, and features

Otherwise everything else is as advertised in the post, hit me up on Slack (@jamie) if you have any questions or issues.

Finally if you could let me know what does work, as well as what doesn’t, it would be really helpful as I am unable to test some devices myself.

Bugs

Please report all issues, bugs, enhancements and features here :

See the complete change logs here :

Images



My Nodered flow for setting lights. Is this possible with Homey?
Homey 2.0.0 Community App Compatibility List
Turn off all lights except the ones in array
Homey 2.0.0 Experimental discussie [NL]
#2

Sign me up :slight_smile:


#3

Happy to test for u.


#4

Me too, sounds very useful…


#5

me 2 :slight_smile:


#6

Sign me up too, need to have the device group on if all devices are on from other triggers


#7

Me too


#8

Nice app ! Happy to test it ! :slight_smile:


#9

Hi @Jamie I’d also like to sign up, thanks.


#10

Hello @Jamie,

Where do you want us to write feedbacks ?

Nice day,

Julien


#11

Sign me in mate :+1:


#12

Would love to be a tester too!


#13

I would like to be a tester…
Currently using it for lights, but love to group Fibaro smoke sensors, PIR sensors, etc…


#14

I would like to be a tester, too.


#15

Thanks everyone, just a heads up to the people regularly updating the alpha branch.

The alpha branch will be changing over to v1.3, while the beta (v1.2) awaits integration. This will allow features to continue to roll out. As always, your experience on beta will be much more stable than upon the alpha branch.

The first alpha release will roll out in about 24 hours.


#16

I can use CLI again, so will happily test your App. Could you please point me to the place where the App can be downloaded.

Thanks!


#17

Try the opening post!


#18

Oops…my wrong!

Installed the App and I think it’s great!


#19

Yes, big step up since the original app was created a while back.
Thanks Jamie.


#20

Now working with v2 - if currently have v2 installed im looking for some help alpha testing.

Thanks