here is complete log , after trying to include thermostat using new beta app. got error and no evice included. had not reset device before inclusion. devicewas not added in the end, as unknown node or otherwise
@Christer can you contact me on Slack for this topic? Let’s see how to get this solved, without flooding the forum topic.
One of the thing I do notice in the logs is that Node 72 is still included securely; whereas this should be blocked.
Hi @Nerohan_Selvendran, welcome to the community. To add the Z-Water and Z-TRM2fx, please install the BETA version of the Heatit app (2.4.0) and install the devices with Homey at close proximity to the devices (move Homey, not the devices).
Today I re-added my Z-TRM2fx thermostat with the new beta version app.
My first attempt ended with the status.Cannot destructure properly ‘wakeUpInterval’ of ‘undefined’ or null which creates an unkown device in developer options. The Zwave comms of this device are working. I removed it sucessfully using the settings-zwave-remove device option and put the thermostat in inclusion mode again (to start exclusion).
No need for homey restart or thermostat factory reset.
My second attempt was succesfull, the only thing that was a bit strange is the thermostat: it replied with ERR in the display instead of the expected “INC”. But it works like a charm. Communication figures in dev-tools look normal now, it used to be way out of line compared to the other zwave devices.
Based on all the positive feedback, I’ve decided to promote the BETA branch to stable.
With a minor change to finalize the preparation for ‘Energy’ (Homey 3.0.0).
Thanks @TedTolboom for the Beta and the work you have done now with fixing the issues. I have put all of my 10 heatit termostats over and now they are (finally) working as they were supposed to
Thanks for the new update. I have been testing it for 2 weeks now without any dropout of the thermostats. I only had some issues adding it to the homey, but after some resets and remove any node on homey, I could add it.
I have a new homey (late 2019) and the latest app versjon. I amtrying to pair my z-trm2fx but all i get is «err» on the thermostat and the pairing times out on the homey.
Hello. Does anybody knows if it is possible to connect digital DS18B20 temperature sensor to Heatit thermostat? There is no official connector, but may be there is some pins on the board?
Is it possible to set the actual temperature to an external sensor or a variable instead of the internal/connected sensor. I would like to sent the average temperature of different sensors of one floor to the thermostat.
My apologies if this has been covered already, but I have a question about the ‘Energy’ functionality. I’m running app version 2.4.0 and I see there is a “Constant power usage” parameter in settings, I assume this is for setting the size of the heating element (in my case underfloor heating). But in Homey Energy tab this power is reported continuously regardless of heating state. I.e. it appears as if full power is consumed also when the thermostat is not engaged.
Am I doing something wrong or is the correct version yet to be deployed?
@Jan_Iversen yes, I am awaiting to receive the 4-button version myself, so I can add support for them in the next update.
Assuming you are referring to the Thermostat. I don’t think the device allows for receiving external Z-wave temperature reports… So I would say no.
Good one. Homey energy is looking to the onoffcapability, whereas I needed to use a custom capability thermofloor.onoff. So Homey energy is not noticing a switch.
Based on this feedback, I do anticipate that your are using the ‘old’ Z-wave thermostat?