[Requests] Homey Pro Community App Requests

What kind of device would you like to be added :

*Bosch heating pump Compress 7000 AA
https://www.bosch-climate.no/produkter/luftluft-varmepumper/compress-7000-aa/oversikt/

What kind of category signal would the app use :

*Its controlled by a wifi adapter and the app WiHeat (cloud?)
https://wi-heat.com

Is there a (public) API / documentation or known other implementations (like Blogs/Github etc)

  • Haven’t found any

Are you willing to loan or donate a device to a developer?

  • If someone lives nearby
3 Likes

What kind of device would you like to be added :

What kind of category signal would the app use :

  • BLE4.2

Is there a (public) API / documentation or known other implementations (like Blogs/Github etc)

Are you willing to loan or donate a device to a developer?

  • Devices have replaced light wall switches so cannot be removed, happy to probe\test as required.

Explanation

  • This light switch was produced in response to the issue that turning off a physical light switch kills the power to the Yeelight ceiling smart light making it inoperable, it provides a hidden power switch (for power on reset) and replicates the provided remote controls functions via bluetooth. (On\Off, Moon mode, dim, color temp change). The device pairs to the light(s) exactly as the hand remote does so protocol may be identical.
3 Likes

What kind of device would you like to be added :
Foobar2000 App, Media Manager and player , similar to KODI etc.

What kind of category signal would the app use :

  • IP/LAN

Is there a (public) API / documentation or known other implementations (like Blogs/Github etc)
yes, https://www.foobar2000.org/SDK

Are you willing to loan or donate a device to a developer?
Download of app Foobar2000

Would love to help testing it, Thanks a lot !

What kind of device would you like to be added :

  • AppleTV

What kind of category signal would the app use :

  • WiFi
  • Bluetooth

Is there a (public) API / documentation or known other implementations (like Blogs/Github etc)

I think the good folks at Home-Assistant have some info

Are you willing to loan or donate a device to a developer?

  • Willing to help debug

This is really to get the info from the AppleTV what states it’s in for better automation.

17 Likes

What kind of device would you like to be added :

RolloHomeControl
Fenster-/turkontakt 8431

Doorcontact sensor

What kind of category signal would the app use :

  • Zwave,

Is there a (public) API / documentation or known other implementations (like Blogs/Github etc)

I can add the sensor to homey but it is NOT recognized as a door sensor.

Are you willing to loan or donate a device to a developer?
No

What kind of device would you like to be added :

What kind of category signal would the app use :

  • BLE - bluetooth

Is there a (public) API / documentation or known other implementations (like Blogs/Github etc)

Are you willing to loan or donate a device to a developer?

  • If requested
16 Likes

What kind of device would you like to be added :
Gerber Prime Zwave Switch https://www.gerberprime.com/switch-main/

  • Brand , and id number(s) of device(s)
    GPS-2000 (only one type of switch)

What kind of category signal would the app use :

  • Zwave,

Is there a (public) API / documentation or known other implementations (like Blogs/Github etc)
Not public, but I have have access to full documentation

  • Where can this be found?
    Please contact me at adrian@liteautomation.com.au or Naor Gerber from Gerber Prime Technologies at naor@gerber-com.net

Are you willing to loan or donate a device to a developer?
Yes, send samples and pay for time to develop app.

Che tipo di dispositivo desideri aggiungere:

  • Wink Hub 2 and Wink relay

Che tipo di segnale di categoria utilizzerebbe l’app:

  • ZWave,
  • Zigbee,

C’è un’API / documentazione (pubblica) o altre implementazioni note (come Blog / Github, ecc.)
Yes



https://winkapiv2.docs.apiary.io/#

Sei disposto a prestare o donare un dispositivo a uno sviluppatore?

  • no

What kind of device would you like to be added : Garage door controller

  • Brand , and id number(s) of device(s): Gogogate2

**What kind of category signal would the app use:

Wi-fi

Is there a (public) API / documentation or known other implementations (like Blogs/Github etc)

  • Where can this be found?

Don’t know

Are you willing to loan or donate a device to a developer?

5 Likes

What kind of device would you like to be added :

Revogi power strip
IP

Is there a (public) API / documentation or known other implementations (like Blogs/Github etc)

I don’t know about public API but i have found this: https://akim.sissaoui.com/en/informatique/maxsmart-resapi/

Are you willing to loan or donate a device to a developer?

Can’t. I’m using it :frowning:

2 Likes

What kind of device would you like to be added :
Brink Air70 (with module): www.air70.nl

  • Brand , and id number(s) of device(s)
    Air70, Air70 Plus with WiFi Module

What kind of category signal would the app use :
WiFi

Is there a (public) API / documentation or known other implementations (like Blogs/Github etc)
So far I dont think so

  • Where can this be found?

Are you willing to loan or donate a device to a developer?
Donate money yes, but a device is almost impossible since it’s over 2000 euros.

1 Like

What kind of device would you like to be added :
Energy Driven Switch Version C

  • Brand , and id number(s) of device(s)
    Widom Version C 8059265060023
    What kind of category signal would the app use :

  • Zwave,

Is there a (public) API / documentation or known other implementations (like Blogs/Github etc)
http://www.widom.it/sites/default/files/WiDom%20Energy%20Driven%20Switch%20-%20EN.pdf

3 Likes

What kind of device would you like to be added :
Leaksmart shutoff valve and sensors

  • Brand , and id number(s) of device(s)
    Brand Leaksmart
    See - https://leaksmart.com/
    Leaksmart Cut-in valve (all pipe sizes)
    Leaksmart Sensor
    Leaksmart Hub 3.0
    What kind of category signal would the app use :
    The valve, sensors and hub communicate via Zigbee. The valve and sensors being Zigbee can be directly connected to any Zigbee hub e.g. Smartthings, Wink, Hubitat without going via the LeakSmart hub.
  • Zigbee,
    The Hub 3.0 communicates via WiFi to the Internet and locally

Is there a (public) API / documentation or known other implementations (like Blogs/Github etc)
It does not appear so as of yet. See the comment about them using standard Zigbee.
It will I suspect not help but several of the other smart hub platforms have their apps for managing LeakSmart on github. I strongly suspect these all communicate directly via Zigbee rather than the hub.

  • Where can this be found?

Are you willing to loan or donate a device to a developer?

  • Yes or No
    No

What kind of device would you like to be added :
Alarm system panel

  • Brand , and id number(s) of device(s)
    DSC PowerSeries (1555, 1555 MX, 5010 (832), 5020 (864), 1616, 1832, 1864)
    with Envisalink 3 or 4 module
    See http://www.eyezon.com/evl4.php
    What kind of category signal would the app use :

  • other ? (like) TCP/IP

Is there a (public) API / documentation or known other implementations (like Blogs/Github etc)
Yes

Note: Whilst there seems to be an app for linking to a DSC panel fitted with the Konnected! module that approach is limited to wired only sensors and would seem to also preclude having the panel monitored by a security company. The Envisalink supports all supports sensors including wireless. It basically acts as a serial to ethernet convertor and leaves the rest of the panel untouched and hence still monitor-able. I would therefore prefer the Envisalink approach.

12 Likes

What kind of device would you like to be added :

Linksys Smart Wi-fi service for a.o. Max-Stream EA9500

What kind of category signal would the app use :

API
Wifi?

Is there a (public) API / documentation or known other implementations (like Blogs/Github etc)

https://www.linksyssmartwifi.com/developer/portal/program-guidelines.html

Are you willing to loan or donate a device to a developer?

Sorry, only have one for my own network :slight_smile:

2 Likes

What kind of device would you like to be added :

Orcon 10rf remote

What kind of category signal would the app use :

868,3MHz

Is there a (public) API / documentation or known other implementations (like Blogs/Github etc)

no

  • Where can this be found?

Are you willing to loan or donate a device to a developer?

no, device is crucial for my main ventilation system

What kind of device would you like to be added :

Busch-Jäger ZigBee Light Link products

ZigBee Light Link power supply insert
Art.-Nr. 6710 U-500

ZigBee Light Link universal relay insert
Art.-Nr. 6711 U-500

ZigBee Light Link LED-dimmer insert
Art.-Nr. 6715 U-500

ZigBee Light Link control element, 1gang
Art.-Nr. 6735-84

ZigBee Light Link control element, 2gang
Art.-Nr. 6736-84

ZigBee Light Link control element, 4gang
Art.-Nr. 6737-84

What kind of category signal would the app use :

  • Zigbee,

Is there a (public) API / documentation or known other implementations (like Blogs/Github etc)

  • Where can this be found?

I don`t know. BJ is member of the ZigBeeAlliance, maybe there are standard commands defined…

Product site:
https://www.busch-jaeger.de/en/products/product-solutions/remote-control/zigbee-light-link/

Are you willing to loan or donate a device to a developer?

All of mine are installed in my house. But I think we can arrange us

9 Likes

**What kind of device would you like to be added :
wifi/ip cam

  • Brand , and id number(s) of device(s)
    D-link DCS 8000LH

**What kind of category signal would the app use
WiFi

**Is there a (public) API / documentation or known other implementations (like Blogs/Github etc)


https://eu.dlink.com/de/de/support/faq/cameras/de_dcs_urls

  • Where can this be found?
    Amazon

Are you willing to loan or donate a device to a developer?

  • Yes
2 Likes

Someone willing to make an app for a Wave-hood:

Brand and id number of device

Category signal
RF-signal, 433 MHz

API/documentation etc
Not that I’m aware of

Willing to loan a device
Hood is built in my ceiling…
I can however provide the sent 433 MHz-signal, by using the RF signal analyzer of Harrie de Groot

1 Like

Is somebody interested in building an app for a gas fire:

Brand and id number of device

Category signal
RF-signal, 433 MHz

API/documentation etc
Not that I’m aware of

Willing to loan a device
Hood is built in my wall…
I can however provide the sent 433 MHz-signal, by using the RF signal analyzer of Harrie de Groot

1 Like