Homey Community Forum

Homey Community App Requests

Che tipo di dispositivo desideri aggiungere:

  • Wink Hub 2 and Wink relay

Che tipo di segnale di categoria utilizzerebbe l’app:

  • ZWave,
  • Zigbee,

C’è un’API / documentazione (pubblica) o altre implementazioni note (come Blog / Github, ecc.)
Yes



https://winkapiv2.docs.apiary.io/#

Sei disposto a prestare o donare un dispositivo a uno sviluppatore?

  • no

What kind of device would you like to be added : Garage door controller

  • Brand , and id number(s) of device(s): Gogogate2

**What kind of category signal would the app use:

Wi-fi

Is there a (public) API / documentation or known other implementations (like Blogs/Github etc)

  • Where can this be found?

Don’t know

Are you willing to loan or donate a device to a developer?

1 Like

What kind of device would you like to be added :

Revogi power strip
IP

Is there a (public) API / documentation or known other implementations (like Blogs/Github etc)

I don’t know about public API but i have found this: https://akim.sissaoui.com/en/informatique/maxsmart-resapi/

Are you willing to loan or donate a device to a developer?

Can’t. I’m using it :frowning:

1 Like

Device to be added to the Smartwares App:

  • inbouwdimmer SH5-TBD-02A

  • inbouw ontvanger SH5-RBS-10A

Signal to be used: 433

Documentation availability: don’t know

Donating a device: yes

Current work around is to use the KlikaanKlikuit device ACM-100.

What kind of device would you like to be added :
Brink Air70 (with module): www.air70.nl

  • Brand , and id number(s) of device(s)
    Air70, Air70 Plus with WiFi Module

What kind of category signal would the app use :
WiFi

Is there a (public) API / documentation or known other implementations (like Blogs/Github etc)
So far I dont think so

  • Where can this be found?

Are you willing to loan or donate a device to a developer?
Donate money yes, but a device is almost impossible since it’s over 2000 euros.

Gibt es schon eine app für EGLO Lampen

first, please keep it englisch in this section of the forum.

And to find out something already supported check the app store. If there isnt and there isnt already y a request in here you can make one.

Could be awesome with this app :blush:

What kind of device would you like to be added :
Panasonic Comfort Clould

  • Brand , and id number(s) of device(s)
    Panasonic Airoconditioning
    What kind of category signal would the app use :
    WIFI

Is there a (public) API / documentation or known other implementations (like Blogs/Github etc)
Not that i know

  • Where can this be found?
    N/A

I would like to control my Air conditioning of Panasonic. It is equipt with a Panasonic WIFI module which works with the app Comfort Cloud.

1 Like

What kind of device would you like to be added :
Energy Driven Switch Version C

  • Brand , and id number(s) of device(s)
    Widom Version C 8059265060023
    What kind of category signal would the app use :

  • Zwave,

Is there a (public) API / documentation or known other implementations (like Blogs/Github etc)
http://www.widom.it/sites/default/files/WiDom%20Energy%20Driven%20Switch%20-%20EN.pdf

+1 and willing to donate

What kind of device would you like to be added :

What kind of category signal would the app use :

  • Z-Wave

Is there a (public) API / documentation or known other implementations (like Blogs/Github etc)

Are you willing to loan or donate a device to a developer?

  • Yes

There is already a Popp app, unfortunately it will not be developed further. Devices like Z-Rain or Z-Weather will not work and new devices will not be added either.
Maybe there is somebody who wants to take on the development at this point.

We have a New Community Hero!!

@mapulu Thanks a lot for the Great Job!!

4 Likes

What kind of device would you like to be added :

  • Generic Chinese ceiling fan

What kind of category signal would the app use :

  • 433mhz

Is there a (public) API / documentation or known other implementations (like Blogs/Github etc)

  • Not to my knowledge

Are you willing to loan or donate a device to a developer?

  • Yes!

Remote:

Internal circuit board has a number “SY-F104”. The board itself is pretty basic. By request I can upload a picture of the board if necessary

What kind of device would you like to be added :
Leaksmart shutoff valve and sensors

  • Brand , and id number(s) of device(s)
    Brand Leaksmart
    See - https://leaksmart.com/
    Leaksmart Cut-in valve (all pipe sizes)
    Leaksmart Sensor
    Leaksmart Hub 3.0
    What kind of category signal would the app use :
    The valve, sensors and hub communicate via Zigbee. The valve and sensors being Zigbee can be directly connected to any Zigbee hub e.g. Smartthings, Wink, Hubitat without going via the LeakSmart hub.
  • Zigbee,
    The Hub 3.0 communicates via WiFi to the Internet and locally

Is there a (public) API / documentation or known other implementations (like Blogs/Github etc)
It does not appear so as of yet. See the comment about them using standard Zigbee.
It will I suspect not help but several of the other smart hub platforms have their apps for managing LeakSmart on github. I strongly suspect these all communicate directly via Zigbee rather than the hub.

  • Where can this be found?

Are you willing to loan or donate a device to a developer?

  • Yes or No
    No

What kind of device would you like to be added :
Alarm system panel

  • Brand , and id number(s) of device(s)
    DSC PowerSeries (1555, 1555 MX, 5010 (832), 5020 (864), 1616, 1832, 1864)
    with Envisalink 3 or 4 module
    See http://www.eyezon.com/evl4.php
    What kind of category signal would the app use :

  • other ? (like) TCP/IP

Is there a (public) API / documentation or known other implementations (like Blogs/Github etc)
Yes

Note: Whilst there seems to be an app for linking to a DSC panel fitted with the Konnected! module that approach is limited to wired only sensors and would seem to also preclude having the panel monitored by a security company. The Envisalink supports all supports sensors including wireless. It basically acts as a serial to ethernet convertor and leaves the rest of the panel untouched and hence still monitor-able. I would therefore prefer the Envisalink approach.

1 Like

What kind of device would you like to be added :

Linksys Smart Wi-fi service for a.o. Max-Stream EA9500

What kind of category signal would the app use :

API
Wifi?

Is there a (public) API / documentation or known other implementations (like Blogs/Github etc)

https://www.linksyssmartwifi.com/developer/portal/program-guidelines.html

Are you willing to loan or donate a device to a developer?

Sorry, only have one for my own network :slight_smile:

What kind of device would you like to be added :

  • UBIQUITI UNIFI VIDEO PROTECT to be integrated in homey and homekit

What kind of category signal would the app use :

  • IP

Is there a (public) API / documentation or known other implementations (like Blogs/Github etc)

https://unifivideo1.docs.apiary.io/#questions-help

Are you willing to loan or donate a device to a developer?

  • Sorry not possible

I’m willing to contribute to the project by means of testing/debugging and ultimately paying a donation the the developer.

2 Likes

What kind of device would you like to be added :

Orcon 10rf remote

What kind of category signal would the app use :

868,3MHz

Is there a (public) API / documentation or known other implementations (like Blogs/Github etc)

no

  • Where can this be found?

Are you willing to loan or donate a device to a developer?

no, device is crucial for my main ventilation system

What kind of device would you like to be added :
Panasonic Comfort Could

  • Brand , and id number(s) of device(s)
    Panasonic Airoconditioning

What kind of category signal would the app use :
WIFI

Is there a (public) API / documentation or known other implementations (like Blogs/Github etc)
Not that i know

  • Where can this be found?
    N/A

I would like to control my Air conditioning of Panasonic. It is equipt with a Panasonic WIFI module which works with the app Comfort Cloud.

What kind of device would you like to be added :

Busch-Jäger ZigBee Light Link products

ZigBee Light Link power supply insert
Art.-Nr. 6710 U-500

ZigBee Light Link universal relay insert
Art.-Nr. 6711 U-500

ZigBee Light Link LED-dimmer insert
Art.-Nr. 6715 U-500

ZigBee Light Link control element, 1gang
Art.-Nr. 6735-84

ZigBee Light Link control element, 2gang
Art.-Nr. 6736-84

ZigBee Light Link control element, 4gang
Art.-Nr. 6737-84

What kind of category signal would the app use :

  • Zigbee,

Is there a (public) API / documentation or known other implementations (like Blogs/Github etc)

  • Where can this be found?

I don`t know. BJ is member of the ZigBeeAlliance, maybe there are standard commands defined…

Product site:
https://www.busch-jaeger.de/en/products/product-solutions/remote-control/zigbee-light-link/

Are you willing to loan or donate a device to a developer?

All of mine are installed in my house. But I think we can arrange us

5 Likes