Logic Home Control App (v2.0.1)

app
z-wave

#1

Logic Home Control

This app adds support for Z-wave devices made by Logic Home Control.

Links:

Logic Home Control app at Athom apps
Logic Home Control app Github repository

Supported devices:

Z-Wave switch module for FUGA® installations (ZHC5010)

image

ZHC5010 is a new Z-Wave wall switch module with four buttons, four LEDs and contains one relay output for controlling a local load. The insert is designed to fit in to a standard LK FUGA® wall mount box (size one-module).
When ZHC5010 is included, a root device and 4 sub-devices (one for each button) are created.
The root device has triggers for Central Scene notifications from all the buttons.

Triggers (Central Scene):

  • Single key press.
  • Double key press.
  • Long key press (key held).
  • Key release, after key held.

Actions:

  • It is possible to control the 4 LED’s, by means of action cards.

Z-Wave Coupler for GIRA (ZHC5002)

image

The ZHC5002 module, together with a GIRA pushbutton module, is a Z-Wave wall switch device that can both control other Z-Wave devices and activate scenes.
The Z-Wave insert is designed for interfacing a GIRA push button sensor module (GIRA push button sensor 2, type 2003 100), that contains two 10 pole connectors, to a Z-Wave network
When ZHC5002 is included, a root device and 6 sub-devices (one for each button) are created.
The root device has triggers for Central Scene notifications from all the buttons.

Triggers (Central Scene):

  • Single key press.
  • Double key press.
  • Long key press (key held).
  • Key release, after key held.

Actions:

  • It is possible to control the 4 LED’s, by means of action cards.

Note: For status updates of the ZHC devices being correctly updated, a manual action is required:

  1. Go to the devices tab > Main node card of the ZHC5010
  2. Open settings (wrench symbol)
  3. Unfold associations
  4. In all association groups where Homey’s ID (1) is present, replace ‘1’ with ‘1.1’ (without quotes)
  5. Add Homey’s ID ‘1.1’ to the association groups for ‘Binary Switch Set’ or ‘Multilevel Switch Set’ when dimming value is needed
  6. Press save settings.

Supported Languages:

  • English

Supported Z-wave regions:

  • Europe

Acknowledgements:

This app and driver development has been taken over from K.T. Nielsen (owner of Logic Home Control).
App development will be done by me but in close collaboration with Logic Home Control.

Feedback:

Any requests please post them in the Logic Home Control app topic on the Athom Forum or contact me on Slack

If possible, please report issues and feature requests at the issues section on Github otherwise in the above mentioned topic.

Contributions

If you appreciate this app, contribute to future development by making a paypal contribution


#2

Changelog:

v 2.0.1

  • Add link to Homey community Forum

v 2.0.0

  • Major app update to SDK2, requires Homey SW release >=1.5.6 * Add support for the ZHC5002
  • Added all options to support FW 2.x (secure inclusion) of ZHC5010 and ZHC5002
  • Restructured parameters settings to simplify options

#3

Frequently Asked Questions:


#4

Hi
I hear you’re on the way to developing an app for LHC5028 / ZIF5028
Is that true?


#5

Hi Simon,

Correct. I hope to find some time in the next weeks to finalize the LHC5028 and LHC5020 drivers.


#6

Do YouTube need a person to testet it?


#7

Much appreciated.
Once I have a version to test, I will let you know


#8

LHC5020 is very similar to LHC5030 (LHC5030 includes 230v Powersupply)
LHC5030 is the same device as Thermofloor Z-Water.