Homey Community Forum

Philips Hue Zigbee

Philips Hue Zigbee

This app adds support for the Philips Hue Devices.


Supported devices

  • Hue 9W A60 E27 EUR White (LWA001)
  • Hue A19 Bulb (Color) (LCT001, LCT015)
  • Hue A19 Bulb (Color) (LCT001,LCT007,LCT010,LCT014,LCT016)
  • Hue A19 White Ambiance (LTW001,LTW004,LTW010,LTW015)
  • Hue Adore Bathroom mirror light (LTW017)
  • Hue Amaze Pendant (LTP002)
  • Hue Ambiance Candle (LTW012)
  • Hue Ambiance Spot (LTW013,LTW014)
  • Hue Aurelle Rectangle Panel Light (LTC015)
  • Hue Aurelle Square (LTC014)
  • Hue Being Ceiling Lamp (LTC001)
  • Hue Beyond Ceiling (HBL003)
  • Hue Beyond Pendant (HBL002)
  • Hue Beyond Table (HBL001)
  • Hue Cher Ceiling (LTC011)
  • Hue color candle (LCT012)
  • Hue Color Spot GU10 (LCG002)
  • Hue Connected Lamp GU10 (LCT003)
  • Hue Dimmer Switch (RWL020 US version)
  • Hue Dimmer Switch (RWL020)
  • Hue Dimmer Switch (RWL021)
  • Hue E14 White Candle BT (LWE002)
  • Hue E27 W&C Ambiance BT (LCA001)
  • Hue E27 White Ambiance BT (LTA001)
  • Hue Econic light (1743830P7)
  • Hue Ensis Pendant (4090331P9)
  • Hue Fair Ceiling Lamp (LTC002)
  • Hue Fair Pendant (LTP003)
  • Hue Filament A60 (LWA004)
  • Hue Filament G93 (LWO001)
  • Hue Filament ST64 (LWV001)
  • Hue Flourish Pendant
  • Hue Fluorish Ceiling Light (4090531P9)
  • Hue Go (LLC020)
  • Hue Go Bluetooth (LCT026)
  • Hue Impress Outdoor Pedestal Light (1743130P7)
  • Hue Impress Outdoor Wall Light (1743030P7,1742930P7)
  • Hue LightStrips (LST001)
  • Hue LightStrips Plus (LST002)
  • Hue Lily Outdoor Spot (LCS001)
  • Hue Living Colors Aura (LLC014)
  • Hue Living Colors Bloom (LLC011,LLC012)
  • Hue Living Colors Iris (LLC010)
  • Hue Lucca Outdoor Garden Light (LWW001)
  • Hue Lucca Outdoor Post (LWW002)
  • Hue Motion Sensor (MSL001)
  • Hue Outdoor Discover Floodlight
  • Hue Outdoor Fuzo Wall Lantern (1744430P7)
  • Hue Outdoor Lightstrip (LST003 and LST004)
  • Hue Outdoor Sensor (SML002)
  • Hue Outdoor Welcome Floodlight (1743630P7)
  • Hue Outsoor Sensor (SML002)
  • Hue Phoenix Pendant (HML003)
  • Hue Phoenix Table (HML005)
  • Hue Phoenix Wall (HML004)
  • Hue play bar
  • Hue Runner (x3 Hue Spot GU10)
  • Hue Sana Wall Light (LCW001)
  • Hue Signe Floor Light - White and Color Ambiance
  • Hue smart plug (LOM001, LOM002, LOM005)
  • Hue Spot GU10 with Bluetooth (LWG004)
  • Hue Still Ceiling (LTC003)
  • Hue Struana Ceiling (LTC012)
  • Hue White (LWF002)
  • Hue White Ambiance GU10 BT (LTG002)
  • Hue White Ambience Adore Bathroom Ceiling (LTC021)
  • Hue White Bulb (LWB010)
  • Hue White Bulb (LWB014,LWB004,LWB006,LWB007)
  • Hue White GU10 PF (LWG001)

Devices added to Test version

  • Hue Calla Outdoor White and Color Ambiance (LCF002)
  • Hue Flourish White and Color Ambiance (4090431P9)
  • Hue Fugato White and Color Double Spotlight (5063230P7)
  • Hue Fuzo Outdoor White Wall Light (1744630P7, 1744530P7)
  • Hue GU10 White and Color Ambiance (5045131P7)
  • Hue Impress Outdoor Path Light (1743230P7)
  • Hue Impress White och Color Ambiance Wall Light (1742930P7)

Devices under implementation

  • Hue Smart Button (ROM001)


If possible, please report issues and make requests at the issues section on Github otherwise as a reply in this topic. https://github.com/sebbebebbe/com.philips.hue.zigbee/issues

Another hue app, or (my guess) did you take over the app ?

Hi there.
Yes, Sebastian who is the original author of the Philips Hue Zigbee app transferred it to me.

1 Like

Hi Johan,

I’ve got the Hue Ensis pendant and AFAICT it should be supported by your app. However, when trying to add it I receive the message that there’s no compatible app installed and therefore it has been added as a basic Zigbee device. Am I doing anything wrong?

The information for this lamp according to the Homey app is as follows:
Product ID (top light): 4090331P9_02
Product ID (bottom light): 4090331P9_01
Device ID: 269
Profile ID: 260

Just for clarification; this lamp contains 2 lights that can be controlled independently from each other, hence the 2 (slightly different) product ID’s.

Thanks for the help!

Hi @baZzz and thanks for your feedback!
Hmm, OK so do you add it two times to get the two different product ID’s from Homey or do you get two devices just from one pairing?

I see that the unit have been added in the app with an other Product ID so what I can do is to add a new device with the product IDs you provide. I just need to make sure I understand the _01 and _02 bit correctly :slight_smile:

I had to add them twice. So each light was added and identified separately. (I’ve included screenshots to clarify.)

Thanks @baZzz for the clarification, I added two new devices to the Test version of the app, please try if this works for you.

Awesome, you da man! :+1:
The only issue is that I made a mistake… :flushed: The lower is actually the upper and the other way around. So the upper light is _01 and the lower _02. Sorry about this!


LOL, THANKS! :slight_smile:
No problem, I’ll just switch it and publish a new test version.

@baZzz Fixed.

Thanks, it’s working flawlessly right now. :+1:t3:

2 More questions though:

  1. After adding the lights to Homey again, they revert back to their default settings. This means that after a power interruption they don’t remember their last setting. In order to change this behavior I first have to add the lights to the Hue Bluetooth app again and manually change this. Would it be possible though to add this setting to the ‘Advanced settings’ of the lights, so this can be changed from within Homey?
  2. I’m now running the test version of the app. I assume this won’t get updated by itself, so do I have to manually install the regular version of the app again once that has been updated with these changes?

Thanks again!

Hmm, I’ll see what I can do about that. I have seen that request from several ppl.

You will get updates to the Test app but it depends on how I publish the Live version if you will automatically get “upgraded” or not… I’ll keep in mind to inform.

1 Like

Great, thanks for all the effort! I’ll keep watching this topic. :+1:t3:


I’ve bought a fuzo outdoor light. It should be compatible with your app. When I add the device it is a unknown zigbee device. Is there anything I’m doing wrong or a little bug in the app?

Greetz Jelmer

Hi @Jelmertje, Fuzo is so far only supported by the test version of the app. Please feel free to try it out. I’d be happy if you report back how it works and if any issues occur. (you can always go back to the Live version without problems)

And please do come back with generic info for the device if you have tried the test version and still are unable to pair your Fuzo device with Homey.

Thanks for fast answering Johan! I installed the beta version. Now I’m having the possibility to dim the light. It works fine. Great job!

1 Like

is this lamp also supported and what type is it? Thx!!!

that are “Philips LivingColors” lghts. Ive read something on the forum …about the same question you have… not sure if its possible but try to search on the name livingcolors or something .


Will do that.

It’s Philips LivingColors Aura (LLC014 ) and yes, it’s supported by the app.