Homey Community Forum

NodOn App (v2.0.1)

z-wave
app

#1

NodOn Z-wave app

This app adds support for Z-Wave devices made by NodOn.
NodOn Logo

Links:

Athom app-store
Github repository

Supported devices:

NodOn Micro Smart Plug

Micro Smart Plug

A wall plug that can be switch on or off, and measures the power usage of the connected device(s).

Capabilities:

  • Turn On / Off
  • Measure Power (Wattage (W))
  • Measure Energie (KiloWatt/hour (kWh))

NodOn Smart Plug

Smart Plug

A wall plug that can switch on or off a big load (3000W), but of course also smaller loads.

Capabilities:

  • Turn On / Off

NodOn Octan Remote

Octan Remote

A remote with magnetic holder, with 4 buttons that can activate several scenes and/or devices.

Capabilities:

  • Battery Level
  • Scene Triggers:
    • Single Press
    • Double Press
    • Press and Hold (1x or 5x a second)
    • Release Hold
  • Sequences (Software based)

NodOn Soft Remote

Soft Remote

A remote with a (soft) silicon skin that can handle a tumble, with 4 buttons that can activate several scenes and/or devices.

Capabilities:

  • Battery Level
  • Scene Triggers:
    • Single Press
    • Double Press
    • Press and Hold (1x or 5x a second)
    • Release Hold
  • Sequences (Software based)

NodOn Wall Switch

Wall Switch

A battery operated wall switch, with 2 switches (and separate up and down directions) that can activate several scenes and/or devices.

Capabilities:

  • Battery Level
  • Scene Triggers:
    • Single Press
    • Double Press
    • Press and Hold (1x or 5x a second)
    • Release Hold
  • Sequences (Software based)

Supported Languages:

  • English
  • Dutch (Nederlands)

Feedback:

Any requests or quesions you can contact me on this Forum or on Slack
If possible, please report issues on Github.

Sequences:

The 2 remotes and wall switch offer the ability to create sequences of the button presses.
This means the amount of different triggers you can have is theoratically infinite.
This is software based, so the longer the sequence, the more prone it is to not trigger that particular flow (Homey might miss a button press).
You can create a sequence in the flow card by chaining the button numbers (left to right, top to bottom) with a comma ( , ) or semicolon ( ; ) in between the buttons.
Example: 1,3 for the sequence top left, then bottom left.

Note

This app add only Z-wave devices, and not any of the other wireless technologies like EnOcean.

Contributions

If you appreciate this app, contribute to future development by making a paypal contribution


#2

Thanks for the app! It worked great until recently. My Octan remote stopped working. Unpaired and uninstalled the app, but now I am unable to add the remote to homey. It says “identified as a controller” and then “Something went wrong”.


#3

did you check your battery level?


#4

Had the same last week, 3 new wall switches. first 2 no problem, the 3 one keeps given the same result as @Thomas mention. Identified as controller, and then something went wrong. After 5/6 time removing it and adding again it worked.


#5

Thanks for the reply. Will check the battery and report back.


split this topic #6

4 posts were split to a new topic: Which device to use for zwave range extention


#7

Had today a nodon wall switch doing nothing any more. Battery checked with multimeter, is stil full. Removed it from homey. Resulting in a unknown node. No remove option (guess the known bug)

Try to add it again, but never got the swich in inclution mode again. (Switch 1 and 2 , and the short 1) not working. Its working when doing switch 1 and 2, and then shortly 3.

Homey says find node and then something wrong. Going to zwave settings remove device… not working as it should. Its say removed when 1 and 2 at the same time, and short switch 3.

Tried a couple of times but got now 3 unknown nodes.

@Caseda ever heard of this?

Stil on homey 1.5


#8

i don’t even know what the 1+2 hold then press 3 does as that isn’t in the manual.
try resetting the device internally and try again, might be that your device just died.

Edit: just found out what it does (just sending the NIF), but that won’t include the device in homey though.


#9

Thks for fast answer. I already did reset everything, nothing works. leave the battery out for the night and try again tommorow. But think you right that the device good be broken. Already send a mail to the shop. Its just a month old.

Include a new one and no problems so must be the device its self

thks again


#10

Solved :arrow_up::arrow_up::arrow_up: bit suprissed but its was a battery isseu, did test it with a multimeter (2.85 v) tought that was good. Leave bat out 24h and tried again. Today its was start including but then it not going further in the procces, so came to conclussion maybe i was wrong, so did changed it and yup no problems​:smiley::ok_hand:


#11

You were right. Had to change the battery. It now works as expected. Thsnk you!