I did Fibaro RGBW Controller
OK - yep, thank you. I donāt understand how to use this to try to solve my problem tho :-/ I donāt see any parameter values in the advanced settings - is this referring to the Raw configuration parameters field?
Thanks
yep, raw paramenters - just bang that in there
Thanks for the tip, but unfortunately that doesnāt make any difference :-/
I donāt think Iām doing anything complex here - just trying to toggle an RGB LED strip on and off, so that it returns to the same colour and brightness each time?
Could someone at Homey to look at this please - weāre about to install 12 or so of these in a new flat to control an LED wall, so I do need it to work.
Thanks
Right. Apologies if I didnāt remember everything in there.
Hi,
some of my fibaro switches (single and double) donāt have the energy consumption feature anymore. Only one double switch still has it. anyone facing the same issue?
Maybe that was changed for older fibaro devices over the last release(s)?
Is there a list available for each device with implemented / supported features?
Cheers, Tom
Hello,
Do you know when Walli Roller Shutter will be available on homey ?
Thank you
As per the opening post HERE you should make a feature request to Athom.
The Fibaro app is managed by Athom and they are not reading this forum actively, let alone answer us.
How can I change the value, I want to change it but I receive an error.
I receive it by every Fibaro switch.
Hi guys, just got a Fibaro FGS-221. I know that this has the possibility to be dry contact, but I wanted to confirm - is it like this out of the box? I donāt want to accidentally melt my switch Iām planning on connecting it to!
Relay had Input contact, that one is for alternative āLiveā whichever it is. Do not connect your 220V to āIā rather whatever second source you want.
It is, just not 100% functional. It does do the dimmer alike function so you can open / close it.
Yes. You can run it at 24v or 230v . Just dont connect relais input with common of the powersource of it when u use different voltage. So 230v and input of relais blue wire or brown of the same 230v is ok. 24v running the fibaro and that same source on input of relais is ok. 24v and this null wire on relais with 230v null wire is not ok.
Since a few weeks I am experiencing issues with scene activation with my Dimmer 2 units. I have flows linked to double click and triple click. It still works, but the flows are always triggered twice. Is anybody else experiencing the same problem?
I have already restarted Homey a few times, checked all my flows and I have the problem with multiple units.
The update doesnāt run on my system
At the same time the Fibaro flows donāt work anymore.
Any idea that could have happened?
PTP for 15 minutes?
Hurray, it works again.
Thanks a lot for your help!
But it turned out that the problem wad triggered by one roller shutter (& Fibaro) that had been disconnected from power because of maintenance work. It seens that the mesh network was broken through this.
But I would not have expected that this could have affected the update of an Homey app. Strange!
Hi all,
I have an issue with fibaro smart implant. The device is visible and recognised by homey but not by neither Google assistant nor Alexa.
I need your support to solve it.
An idea ?
Thanks
Synchronise?